GETWAB

01 / Federal Opportunity Brief

TRANSMITTER,PRESSUR

Status
Active
Deadline
Dec 14, 2026 4:30 PM GMT-0400
Solicitation
SPRMM126QHF30
Updated
Nov 16, 2026
NAICS
334513
PSC
6685

02 / Federal Buyer

Who is buying?

03 / Purchase

What is the government buying?

Requirement

TRANSMITTER,PRESSUR
The current notice is soliciting this requirement from eligible offerors.

Scope available now

The scope section states that the contract/purchase order contains requirements for manufacture and contract quality requirements for “TRANSMITTER,PRESSUR.” The notice also references inspection and acceptance being applicable (source/quality control related notes) and specifies electronic invoice/receiving report submission through PIEE-WAWF for any resulting order. Specific technical deliverables beyond these references are not included in the supplied evidence.

Contract vehicle

The notice describes that related contractual documents (contracts, purchase orders, task orders, delivery orders, and modifications) are treated as “issued” by the government when sent via mail, facsimile, or electronic commerce methods such as email. It does not clearly state whether this is an IDIQ-style framework or a single contract/PO.

How work is assigned

The notice indicates there may be contractual documents such as purchase orders/task orders/delivery orders/modifications related to the procurement, and that the government’s acceptance of the contractor’s proposal constitutes a bilateral agreement to issue contractual documents. Specific assignment mechanics beyond “issued” timing are not provided.

04 / Contracting Requirements

How will this procurement work?

RequirementWhat the notice saysSource status
EligibilityIt states a “Notice of Total Small Business Set-Aside.” It also includes conditions under which changes in production facilities may be approved (while stating the government may still deny approval). The notice does not provide other bidder eligibility details in the supplied evidence.Partially Confirmed
Contract ceilingNot disclosedNot Disclosed
Minimum guaranteeNot disclosedNot Disclosed
Contract durationNot disclosedNot Disclosed
Foreign participationNot disclosedNot Disclosed
Proposal and award procedureFor evaluation, award is to be made using “Lowest Price Technically Acceptable (LPTA)” criteria per DFARS 215.101-2-70(a)(1)(i). For submission, it references electronic submittal of an “Invoice and Receiving Report (COMBO)” through PIEE-WAWF for any order, and it includes guidance about submitting quotes via Electronic Data Interchange (EDI) and specifying exceptions. Detailed proposal instruction content (what must be submitted as a quote, format, and complete evaluation factors/scoring) is not included in the supplied evidence.Partially Confirmed
Staffing and securityThe notice includes a cybersecurity maturity model certification level requirements reference and a security prohibitions/exclusions reference. However, the supplied evidence does not include the actual certification level details or the specific prohibitions/exclusions content.Partially Confirmed
Read the original SAM.gov description

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)|1|ISO9001| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|x||x|||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving report (combo)||TDP|SPRMM1|TBD|TBD|TBD|TBD|||TBD|||||TBD| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|Ishmael.palmer@dla.mil and lendorph.ramos@dla.mil| NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025))|1|| PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG COMMERCIAL VESSELS (DEV 2026-O0047)(MAR 2026))|2||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|X|X|X|||X|||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| 1. All contractual documents (i.e. contracts, purchase orders, task orders, Delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 2. Drawings or technical data are not available for this item. 3. Delivery days_________aro. 4. Offer valid for _____ days. 5. When submitting quotes via Electronic Data Interchange (EDI), make sure you specify any exceptions (i.e. Mil specs/standards, packaging, Inspection & Acceptance (I&A), packaging houses etc) or follow up with a hardcopy of the exceptions. If nothing is indicated or received, award will be based upon solicitation requirements. Changes or requests for changes after award will have consideration costs deducted on modifications. 6. If you are not the manufacturer of the material you are offering, you MUST state who the Original Equipment Manufacturer (OEM) is ?Commercial and Government Entity Code (CAGE) code? and the part number you are offering. 7. Please provide an email address for follow up communications. ____________________________________________________________ 8. It is recommended that vendors provide contact information to NAVSUP Weapon System Support (WSS) Mechanicsburg in order to receive automated notifications from Navy Electronic Commerce Online (NECO) when contracts/modifications are issued by Defense Logistics Agency (DLA) Weapons Support Mechanicsburg and posted on Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA). To receive these notifications, contact: NAVSUPWSS code 025, procurement systems design and contract support division Via email at NAVSUPWSSITIMPHelpdesk@navy.mil. Please include the following information with your request: CAGE code, company name, address and Point-of-Contact (POC) with phone number and email address. 9. Contractors can view their orders, contracts and modifications at the EDA web tool. This web tool is located at the PIEE website. It is recommended that the contractor register for EDA at https://piee.eb.mil/. Click on new user and registration. Any order resulting from this Request for Quotation will require electronic submittal of Invoice and Receiving Report (COMBO) through PIEE-WAWF. 10. The following DLA Procurement Notes are applicable to this requirement: E06 Inspection and Acceptance at Source (JUN 2018) 11. INSPECTION OF MATERIAL WILL BE AT (CAGE & ADDRESS): ______________________________________________________________ INSPECTION OF PACKAGING AND FINAL ACCEPTANCE OF MATERIAL WILL BE AT (CAGE & ADDRESS): ______________________________________________________________ 12. UCF SECTION F PRODUCTION FACILITY CHANGES (a) The performance of any of the work contracted for in any place other than that named in the contract is prohibited unless specifically approved by the Contracting Officer. Written requests for a change in production facilities must be submitted in writing to the Contracting Officer. Changes in production facilities may be approved, provided: (1) Performance by small business or in labor surplus areas as required by the contract will not be changed; (2) The change will not cause a delay in delivery or necessitate a change in the purchase description; (3) The free on board (f.o.b.) point is not changed; and (4) Each request is supported by a price reduction of $250.00 to cover the Government's administrative costs to process the change. (b) The Government reserves the right to deny approval even if these four elements are met. Award evaluations will be made using the Lowest Price Technically Acceptable (LPTA) criteria per DFARS 215.101-2-70(a)(1)(i). This procurement requires Higher Level Inspection. This requirement is being solicited under FAR Part 18, Emergency Acquisitions, utilizing Emergency Acquisition Flexibilities (EAF) Authority. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the TRANSMITTER,PRESSUR . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The TRANSMITTER,PRESSUR furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no. ;66935 025-31208-007 65048 89PCTSW300G2 53986 89PCTSW300G2; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's it

05 / Historical Spending Trend

How has spending on the selected comparable contracts changed?

The same closed fiscal-year window and the same complete comparable-contract set are used throughout this Brief. Net obligations total $299.9K across 4 fiscal years.

Annual net obligations for the selected comparable contract set for this opportunity, classified under NAICS 334513 and PSC 6685.
Annual FPDS net obligations for the selected comparable contract set; direct and broad matches are identified separately in the table, and this is not total NAICS or PSC market spending.
Fiscal yearComparable obligationsActionsVendors
FY 2020$109.5K21
FY 2021$011
FY 2024$190.3K11
FY 2025$011

06 / Related Historical Awards

Which contracts support the comparison?

No direct contract reference was found. 2 broad matches are shown as supporting context.

Selected historical contracts comparable to this opportunity, ranked by absolute net obligations.
Comparable contracts selected using buyer, office, classification and requirement-language evidence; they are not asserted as predecessors.
ContractVendorLatest activityOfficeNAICS / PSCMatchObligationsActions
SPE7M124P8224JAG COMPONENTS, LLCMay 29, 2025DLA WEAPONS SUPPORT334519 / 6685Broad match
Buyer and requirement-language evidence
$190.3K2
SPRTA120F0236HAMILTON SUNDSTRAND CORPORATIONJun 24, 2020DLA AVIATION AT OKLAHOMA CITY, OK333999 / 6685Broad match
Buyer and requirement-language evidence
-$9.1K1

07 / Contractor Evidence

Which contractors have performed related work?

Historical contractors are ranked by direct procurement-family evidence and comparable contract activity. The table distinguishes connected holders from broader performers without identifying unverified bidders.

No directly connected predecessor was identified. The companies below are historical performers selected from the comparable contract set; none is identified as a bidder.

Suppliers ranked by net obligations within the selected comparable contract set for this opportunity.
Supplier concentration within the comparable contract set only; ranking does not establish incumbency or intent to bid.
CompanyEvidenceFitWhy includedContractsActionsObligationsLatest activityLinks
JAG COMPONENTS, LLC
UEI NN9ABNLZDJ93 · CAGE 7YJE4
Broad historical performer
Historical performer
ModerateComparable buyer and requirement history12$190.3KMay 29, 2025GETWAB profile
HAMILTON SUNDSTRAND CORPORATION
UEI JC42EBJ5NFJ1 · CAGE 73030
Broad historical performer
Historical performer
ModerateComparable buyer and requirement history11-$9.1KJun 24, 2020GETWAB profile
Verified via SAM Entities
Official website

08 / Competitive Landscape

How was comparable work competed?

Competition treatment is calculated from exactly the same closed-period contract set used in Sections 5–7. It describes historical actions, not the outcome of this solicitation.

FPDS extent-of-competition categories recorded on the selected comparable contracts.
Competition treatment recorded only on the comparable contract set; it does not predict the outcome of this solicitation.
FPDS treatmentCodeActionsObligationsShare
Competed under simplified acquisition proceduresF2$190.3K63.5%
Not competedC3$109.5K36.5%

09 / Procurement History

How was this opportunity published and updated?

One SAM.gov notice record was resolved for this procurement family.

NoticeTypePostedResponse deadlineStatusOfficial source
SPRMM126QHF30
Current Brief record
TRANSMITTER,PRESSUR
SolicitationNov 13, 2026Dec 14, 2026 4:30 PM GMT-0400ActiveView on SAM.gov

10 / NAICS and PSC Market Context

How large is the selected comparable market?

Classification codes organize the evidence; they do not prove that every contract in the broader NAICS or PSC market matches this requirement.

Comparable obligations$299.9K
Comparable contracts2
Historical suppliers2
CoverageFY 2020–FY 2025

11 / Capture Signals and Risks

What should be validated before committing capture resources?

Capture signals separate verified procurement-family evidence from unresolved requirements and market-only indicators.

Watch

Direct procurement-family evidence

No direct award record found

Watch

Buyer proximity

No same-office comparable identified

Watch

Eligibility

Not disclosed in the indexed notice

Watch

Unresolved requirement fields

7

12 / Who Should Pursue

When does this opportunity fit?

Pursue if
  • Your team can demonstrate recent, relevant delivery in TRANSMITTER,PRESSUR.
  • Your company can document the stated eligibility conditions: It states a “Notice of Total Small Business Set-Aside.” It also includes conditions under which changes in production facilities may be approved (while stating the government may still deny approval). The notice does not provide other bidder eligibility details in the supplied evidence.
  • You can perform under the stated acquisition model: The notice describes that related contractual documents (contracts, purchase orders, task orders, delivery orders, and modifications) are treated as “issued” by the government when sent via mail, facsimile, or electronic commerce methods su
  • You can show credible past performance for SPRMM1 DLA MECHANICSBURG or a closely related federal customer.
Partner if
  • Your technical scope fits, but you lack demonstrated history with SPRMM1 DLA MECHANICSBURG.
  • You need a specialist teammate to close unresolved staffing, security, or detailed-scope requirements before committing.
Pass or investigate further if
  • You cannot satisfy or verify the stated eligibility conditions: It states a “Notice of Total Small Business Set-Aside.” It also includes conditions under which changes in production facilities may be approved (while stating the government may still deny approval). The notice does not provide other bidder eligibility details in the supplied evidence.
  • Your delivery model cannot support the stated contract vehicle or order-based work structure.
  • The unresolved requirements shown above cannot be validated before committing proposal resources.